MB SD Connect Compact 4 Star bettery and wifi card installation
2) SD C4 WIFI setup instruction
3) How to solve SD C4 WIFI does not work
4) SD C4 Driver card cause WIFI cannot be found on PC solution
2, MB SD Connect 4 local area connections and administration parameter settings
Step one: set SD connect 4 local area connection Internet Protocol (TCP/IP) Properties
IP address as: 172.29.127.119
subnet mask: 255.255.0.0
Step2: sd connect4 configuration change
Click "configuration" then a windows named "Warning" apears, says "Caution! Changing the configuration can impair the fault-free functioning of the system. Do you want to change the configuration?
Step 3: sd connect4 mux register configure setting
Click "MUX" button, then in the multiple choice box, please click "Register/Configure"
Step 4: select the name for sdconnect
Select the name for SDCONNECT as 4
Step 5: sd connect4 wlan parameter road setting
Set WLAN parameters, Road including: ID address, Network screen, SSID (network name), Encryption, key/
ID address: 192.168.2.200
Network screen: 255.255.255.0
SSID (network name): Road24h
Step 6: sdconnect toolkit device configuration
SDconnect Toolkit administration information conclusion including:
General information, WLAN conficuration, LAN configuration
3, How to solve SD C4 WIFI does not work
I can install and activate the software. When i connect the mb sd star c4 with my computer, computer can recognize the hardware, but WIFI does not work. I connect the star c4 with my car and do the self test. Test result are all OK. I think my setup is right, i cannot find the problem. How to solve this problem?
Here is the solution:
1) Cannot search Road24h
2) Can search Road24h but cannot match
3) Can match but show "No signal"
4) Connect the mb sd star c4 with your car as the following photo
5) Then follow the video to setup your mb sd star c4: How to solve MB SD STAR C4 WIFI cannot use setup instruction.
4. SD C4 Driver card cause WIFI cannot be found on PC solution
I insert the HDD to my D630 laptop, but find it does not have the WIFI option. I test the lan cable connect via PC. it works normally, but i need to use this WIFI function. How can i solve it. My "network connections" show like this
While usually normal one will show like this
Solution: This one is caused your PC WIFI driver problem. You need to update the PC WIFI driver so that PC can recognize the HDD perfectly. Here is the D630 WIFI driver download link:
If your PC cannot recognized the HDD even via cable communication. Then your ordinary PC Driver need update. Here is the oridinary DELL D630 PC driver download link:
4. On recent days, two of our customers meet the following problem, and use the following way to solve, here i will chare the solution:
1) Initialization of diagnosis multiplexer failed. Our customer can use Wire connection to diagnose the star, but cannot use wireless to diagnose. When use wireless, then give the prompt like the photo
Solution: Please read the part 3 article and follow that video to setup the WIFI to diagnose.
2) Customers usually will give us these activation data:
if you need to activation hardware id, then will give Hardware id: 105A-FC3C-2EED-F807-69EB-C67C-B00D-45FF
And we will send the activation data like this:
And a file for Hardware ID activation:
After we send all the activation file to customers, he have registered all the software, logged the sdconnect but when he try an use xentry it show an error message:
"This software does not aceept more hardwar changes, please contact email@example.com"
For usual star activation, customers will follow our video to fill the activation data to the box. These steps does not contain activation for hardware ID. So you still need run the liencese we send to you. This problem is that he does not run license. After you run the license. Then this problem will be solved and you can use the software.
1. Be sure to disable/uninstall anti-virus software
Please note,anti-virus software can flag up this item software as having a virus. This is a false positive and is due to the software containing the application file. So Before setup the device software, please disable/uninstall anti-virus software or install a more reliable free virus scanner! Our this item software is completely safe and virus free and all other virus scanners confirm this.
If the software data is destroyed or lost because you forget to disable/uninstall anti-virus software, please contact our customer service, we arrange to resend you CD or send you the software via internet.
2. Required windows operation system is windows XP
Be sure to setup and run the device software under windows XP. Otherwise the device software and program can be broken or it will fail to work.
After-sales questions and issues: Contact our Customer Service Department. (A customer representative will get back to you).
Please Sign In first if you want to later edit or manage reviews uploaded by yourself.