OBDSTAR X300 PRO3 Technical Services
Here is the test report of how to program a H chip key and program the remote using the key master.
Car: Toyota Altis Esport
Purpose: program a remote with a chip H (47)
Tools to use:
KD900 Remote Maker to make a remote
Two keys- right: original, left: new to be programmed
First make a remote key with the KD900 and insert the chip H (47)
Then, program the chip through obdstar key master
Select Immobiliser-> Toyota/Lexus-> Toyota/Lexus v31.03
Select Immobiliser-> Type 2 (with G/ H)-> Add a key
1 master key is needed to erase or add other keys!
How to identify a master key and a valet key?
Insert the key into ignition switch, if the immobiliser light isn’t bright, that is the master key; if it is bright for a second and then extinguished, that is the valet key.
Insert the key into ignition switch
So insert the programmed master key, and switch ignition on, then press Enter to continue
Read the prompt to go on:
Insert to match the key and keep the ignition switch off and wait until about 60 seconds until the anti-theft lights go out and the matching is done
So, insert a new key wait until the security light goes off (need 60s)
insert a new key
The car can start successfully
Next, program the remote, also with OBDSTAR Key Master
Go to Immobiliser-> Add a key-> Type 2 (with G/ H)-> Remote-> Type 1
1 ignition switch is turned on
2 mainline is connected
3 battery has power
4 is equipped with this system…
Select Remote-Type 2
Switch ignition on and open the driver door
Press LOCK and UNLOCK together for a sec within 30 sec, press LOCK once
Successfully program a remote!
After-sales questions and issues: Contact our Customer Service Department. (A customer representative will get back to you).
Please Sign In first if you want to later edit or manage reviews uploaded by yourself.