Welcome to OBD2Express.co.uk! Sign In or Register
Home - Products - Technical Service - Reflash CARPROG FULL V8.21 MCU AT91SAM7S256(Solve)
« Go Back

Reflash CARPROG FULL V8.21 MCU AT91SAM7S256(Solve)

Photos

Reflash CARPROG FULL V8.21 MCU AT91SAM7S256(Solve)

Description

Here is a step-by-step instruction on how to reflash CARPROG Mcu AT91SAM7S256, with the help of all DK forum members who made this possible.

Here is a step-by-step instruction on how to reflash CARPROG Mcu AT91SAM7S256, with the help of all DK forum members who made this possible.
I bought my Carprog clone v8.21 firmware from:

http://www.obd2express.co.uk/wholesale/carprog-full-new-firmware.html
We need the stuff:
1- AT91SAM7S256.bin
2- Jtag programmer
3- Jtag software

We need to prepare the Carprog to connect to Jtag programmer but first the flash need to be erased, the Jtag function in mcu is disabled, you can't connect to the mcu before erase the flash. Remove the AT88SC eeprom from the board, please note where is the pin 1 in eeprom before remove:
reflash-CARPROG-Mcu-AT91SAM7S256-(1)

Carefully lift the pin 55 (reset) of the mcu and solder a wire and secure it with a small ammount of silicone (you don't want to broke the pin in the process).
Connect the Carprog (with the pin 55 dissconected) to the 12v supply, wait about 10 seconds and connect the wire from pin 55 to Vcc (3.3V) in Carprog:
carprog-full-new-firmware-online

reflash-CARPROG-Mcu-AT91SAM7S256-(2)reflash-CARPROG-Mcu-AT91SAM7S256-(3)
Wait from 5 to 10 seconds after connect the 12v supply, the flash content will be erased and the Jtag option of the Mcu will be enabled now. If not work leave connected for about 3 to 5 minutes. Disconnect the 12v supply from CarProg full  and remove the pin 55 wire from vcc. The pin 55 must remain disconnected until the programming process is done.

 

Ok, that’s it. I make it; and you try on you risk.

Write a Review
* Rating:
    Please select rating stars.
* Your First & Last Name:
* Your E-Mail Address:
* Review Detail:
*Verification Code:
          No right? Get a new Verification Code
 
Tell us what you think about this item and share your opinions with other people. Please make sure your review focuses only on this item. All reviews are moderated and will be reviewed within two business days. Inappropriate reviews will not be posted.
After-sales questions and issues: Contact our Customer Service Department. (A customer representative will get back to you).
Please Sign In first if you want to later edit or manage reviews uploaded by yourself.

Search

You can search Technical Service by keyword.
Bookmark It