Welcome to OBD2Express.co.uk! Sign In or Register
Home - Products - Technical Service - V4.94 Digiprog3 Odometer Master Programmer Technical support
« Go Back

V4.94 Digiprog3 Odometer Master Programmer Technical support

Matched Product
Cheap V4.94 Digiprog III Digiprog3 Odometer Master Programmer Entire Kit

Cheap V4.94 Digiprog III Digiprog3 Odometer Master Programmer Entire Kit   Item No. SM47-D

Buy it Now: €159.99      Click Here to Shop
Digiprog3 is a cost-effective mileage correction tool, which supports multi-language and full range or vehicle. V4.94 digiprog 3 is latest version of Digiprog3, add more car models on the basic of V4.88.

Photos

V4.94 Digiprog3 Odometer Master Programmer Technical support
V4.94 Digiprog3 Odometer Master Programmer Technical support
V4.94 Digiprog3 Odometer Master Programmer Technical support
V4.94 Digiprog3 Odometer Master Programmer Technical support
V4.94 Digiprog3 Odometer Master Programmer Technical support
V4.94 Digiprog3 Odometer Master Programmer Technical support

Description

How to repair Digiprog 3 update failure- a blue screen
This is an ideal solution to fix Digiprog 3 (blue screen) after a upgrade failure. It has been tested ok by many users,  especially the old Digiprog 3 owners updating 4.94 software themselves.
 
NOTE: you may be at risk to try this if not experienced enough.

1. Reasons of a blue screen.
a)  inappropriate update for Digiprog 3. (the most common cause)
We must remember that updates are created for the serial number. The serial number of the update files must be Digiprog 3 serial number. Otherwise, upload the files to another serial number gives us the effect shown in the picture above.
b)interrupted during the upgrade of communication between PC and the digiprog III device.
c)Other causes: unrelated to update the device
 
2. How to fix the DIGIPROG 3 mux after a failed update.
To repair the unit, you need:
a) Update files with the corresponding serial number = serial number of the device. 
b) Programmer serial memory for example, willem.
Ok, so we begin. We will have 3 digiprog undress and get into the PCB, exactly 2 serial memory.
 
You will see a such a view:

Us interested, memory, marked in the picture above. Are respectively a memory U1A and U2A. These are the memories that are 22, feet on one side, which is 44, feet the entire memory. We remove the memory U1A from the plate and put in the programmer.
 
Load a file content digi1.bin, to memory U1A.

Then again put memory on the board.
Do the same with memory U2A. Only here to load file Digi2.bin

Then again put memory U2A on the board.
Preferably before each update, do yourself a copy memory dumps U1A and U2A. Then we can go back in case of problems with the update to the old version.

Twirl, back digiprog. After this step, run digiprog. If everything went well that you will be greeted this image

Write a Review
* Rating:
    Please select rating stars.
* Your First & Last Name:
* Your E-Mail Address:
* Review Detail:
*Verification Code:
          No right? Get a new Verification Code
 
Tell us what you think about this item and share your opinions with other people. Please make sure your review focuses only on this item. All reviews are moderated and will be reviewed within two business days. Inappropriate reviews will not be posted.
After-sales questions and issues: Contact our Customer Service Department. (A customer representative will get back to you).
Please Sign In first if you want to later edit or manage reviews uploaded by yourself.

Search

You can search Technical Service by keyword.
Popular Search
Bookmark It