Welcome to OBD2Express.co.uk! Sign In or Register
Home - Products - Truck diagnostic tool - Truck Ad-blueobd Emulator for IVECO Quality A
« Go Back

Truck Ad-blueobd Emulator for IVECO Quality A

Item No. SH39
In Stock
Retail price:€29.99
Buy it Now (1 pcs):€27.99 You save €2.00
Quantity:
      
Shipping:
   Standard Flat Rate Shipping Service 
Estimated delivery time: 7-18 working days.See details»
Weight:
0.1KG
Package:
15cm*10cm*5cm      ( Inch:5.91*3.94*1.97 )
Returns:
Return for refund within 30 days,buyer pays return shipping.Read details »
Ad-blueobd Emulator Box designed to disable Ad-Blue system used in trucks, buses and other heavy vehicles with EURO 4/5 exhaust emission rates Ad-Blue Emulator Box bypasses electronic module of the Ad-blue system on vehicle

Ad-blueobd Emulator Box bypasses electronic module of the Ad-blue system on vehicleIVECO Ad-Blue Emulator, Trucks and other heavy vehicles

Ad-blueobd Emulator Box designed to disable Ad-Blue system used in trucks, buses and other heavy vehicles with EURO 4/5 exhaust emission rates Ad-Blue Emulator Box bypasses electronic module of the Ad-blue system on vehicle.

Its very easy to fit Ad-Blue Emulator Box to any truck or bus equipped with Ad-Blue system and it will override Ad-Blue system instantly, it will stop the usage of Ad-Blue liquid. Ad-Blue Emulator Box disables Ad-Blue system electronics gently so there will be no power loss of the engine or any warnings on the dashboard and in diagnostic system.

This device works without interfering to work of other electronic systems of the vehicle.

Ad-Blue Emulator Box has a wide range of supported vehicle models and there is only one version of emulator for all supported trucks, just upload the necessary program to the Ad-Blue Emulator Box and you can install it on any supported truck.

 

INSTALLATION

The connections details diagram and wire colours refer to IVECO STRALIS Year 2009, but the main procedure of the minusblue module does not vary. Before proceeding make sure no faulty codes are memorised in the original ECU, AD-BLUE liquid is higher than the reserve level and the truck batteries are disconnected from the system.

 WIRING

5 conductors:

1) RED(+15). To be connected to a 24V source enabled when the engine key is in the ON position. This connection will supply power to the minusble Module when the engine key is on(dashboard on).

2) BLACK(0V). To be connected to an earth.

3) GREY(+30). To be connected to a 24V supply always available to the existing ad-blue system (F4 protection fuse and the ad-blue system).

4) WHITE(CAN H). To be connected to CAN H of the system.

5) BROWN(CAN L). To be connected to CAN L of the system.

The connections must be made under the box of the connectors located under the protection cover of the radiator(passenger side).

The conductor of the ground of the ad-blue have the number 0000, but it is possible to use another ground conductor found by a multimeter.

 ACTIVATION

The minusblue module and the original ad-blue module CANNOT both be activated at the same time, the GREY ACTIVATION WIRE(+30) is to enable the minusblue module working.

It is important to connect the GREY ACTIVATION WIRE(+30) to a 24V source always available(battery), moreover, the soldering operation must be done between the 20A fuse(F4) and the existing adblue module.
If you want to stop and exclude the original ad-blue module from working, all that needs to be done is to remove the F4 fuse before starting the engine.

The minusblue module will automatically be activated.

To re-instate the original ad-blue module, all that needs to be done is to reinstall F4 fuse before starting the engine. The minusblue module will automatically be de-activated.

SELF LEARNING

When the minusblue module is fully connected to the electrical circuit of the original ad-blue module, and after identification of the F4 fuse controlling the power feeding to the original ad-blue module the truck batteries can be
Re-connected.

The minusblue module aquires the inputs from the CANBUS the first time the dashboard is turned on(key on but engine still off).

1) Make sure the F4 fuse is inserted.

2) Turn on the dashboard(key on) and verify that the red led is on.

3) After approx 1 minute the RED led will turn off and the green led will turn on.

4) Switch off the dashboard(key off).

After this procedure the minusblue module will be activated whenever the dashboard is turned on(key on).

The result will be:

1) If the F4 fuse is installed the original ad-blue system will be working. Both red and green leds will be on.

2) If the F4 fuse is not installed the original ad-blue system will not be working and the minusblue module will be activated. Both red and Green led will be flashing.

NOTE:- ALL THE OPERATIONS WITH THE F4 FUSE MUST BE DONE WITH THE DASHBOARD SWITCHED OFF(KEY OFF).

LED FUNCTION ON - OFF

KEY OFF:- RED OFF, GREEN OFF - NO POWER FEEDING.

KEY ON:- RED OFF, GREEN OFF - TRUCK NOT SELECTED.

KEY ON:- RED ON, GREEN OFF - WAITING FOR SELF-LEARNING.

KEY ON:- RED OFF, GREEN ON - LEARNING COMPLETED.

KEY ON:- RED ON, GREEN ON - DATA SAVED, MODULE NOT ACTIVATED.

KEY ON:- RED PULSE, GREEN PULSE - DATA SAVED, MODULE ACTIVATED.



 

When this box connected - AdBlue system of the truck would be fully emulated, no errors related to AdBlue.

The box can be fast and easy installed to truck. You can disconnect it, reset and install into another truck.
 


Quality A PCB board display:


 

Shipping and delivery Attention: 

Flat airmail: 7-18 working days on the way. For remote area or holiday, need more time.

DHL: For MOST non-free shipping goods, default shipping method is DHL. Need 3-5 working days on the way after dispatch the goods.

YANWEN Express: 7-14 working days on the way, no need to pay tax for most european counties.

EMS: 6-10 working days on the way. To Russian only send by EMS. For some remote area, if you do not want to pay remote fee, we can send it to you by EMS too.

Aramex: 4-6 working day. To most middle east counries. If you do not like this shipping method, please leave message on your order.

Attention:
If you needs YANWEN express shipping or other shipping method like UPS, TNT, FedEx and so on, or you have special needs for your order, such as declared name and so on, please leave message on the order to notify us. Otherwise we will send the order as our usual practice.
As different country has different import policy, sometimes we will change the shipping method based on the counties and goods.
When you get the parcel, before sign for acceptance, please check the package to make sure the product is correct and no damage. 

After sale service:
Any question you want to know or issue on usage. Please send email to sales@obd2express.co.uk. Please give us your detailed description, or error photo. We will provide the solution or solve it for you by teamviwer. For some special function, you can take the photo or video and send us to check if you operate it rightly.

For any question, please contact us at:

E-mail:sales@obd2express.co.uk
Skype:obd2express.co.uk
facebook: Jean Clinton

Write a Review
* Rating:
    Please select rating stars.
* Your First & Last Name:
* Your E-Mail Address:
* Review Detail:
*Verification Code:
          No right? Get a new Verification Code
 
Tell us what you think about this item and share your opinions with other people. Please make sure your review focuses only on this item. All reviews are moderated and will be reviewed within two business days. Inappropriate reviews will not be posted.
After-sales questions and issues: Contact our Customer Service Department. (A customer representative will get back to you).
Please Sign In first if you want to later edit or manage reviews uploaded by yourself.
Maybe you also like ...
ALPHANUMERIC CODE CALCULATOR for IVECO Work on Win XP/Vista/7 no need shipment
€180.00
Product's Tags:   truck adblue emaultor
Bookmark It