Truck Ad-blueobd Emulator for RENAULT
Free Shipping Standard Flat Rate Shipping Service
Estimated delivery time: 7-18 working days.See details»
- 18cm*8.5cm*5.5cm ( Inch:7.09*3.35*2.17 )
- Return for refund within 30 days,buyer pays return shipping.Read details »
- Manufacturer Specifications
- Product's Reviews
- Write a Review
Renault Ad-blueobd Emulator, Trucks and other heavy vehicles
Ad-blueobd Emulator Box designed to disable Ad-blue system used in trucks, buses and other heavy vehicles with EURO 4/5 exhaust emission rates Ad-blueobd Emulator Box bypasses electronic module of the Ad-blue system on vehicle.
Its very easy to fit Ad-blueobd Emulator Box to any truck or bus equipped with Ad-blue system and it will override Ad-blue system instantly, it will stop the usage of Ad-blue liquid. Ad-blueobd Emulator Box disables Ad-blue system electronics gently so there will be no power loss of the engine or any warnings on the dashboard and in diagnostic system.
This device works without interfering to work of other electronic systems of the vehicle. Ad-blueobd Emulator Box has a wide range of supported vehicle models and there is only one version of emulator for all supported trucks, just upload the necessary program to the Ad-blueobd Emulator Box and you can install it on any supported truck.
The connections details diagram and wire colours refer to RENAULT PREMIUM 450 Year 2008, but the main procedure of the minusblue module does not vary.
Before proceeding make sure no faulty codes are memorised in the original ECU, AD-BLUE liquid is higher than the reserve level and the truck batteries are disconnected from the system.
1) RED(+15). To be connected to a 24V source enabled when the engine key is in the ON position. This connection will supply power to the minusble Module when the engine key is on(dashboard on).
2) BLACK(0V). To be connected to an earth.
3) GREY(+30). To be connected to a 24V supply always available to the existing ad-blue system (F109 protection fuse and the ad-blue system).
4) WHITE(CAN H). To be connected to CAN H of the system.
5) BROWN(CAN L). To be connected to CAN L of the system. The connections must be made under the box of the connectors located on the chassis.
The minusblue module and the original ad-blue module CANNOT both be activated at the same time, the GREY ACTIVATION WIRE(+30) is to enable the minusblue module working.
It is important to connect the GREY ACTIVATION WIRE(+30) to a 24V source always available(battery), moreover, the soldering operation must be done between the 20A fuse(F109) and the existing ad-blue module.
If you want to stop and exclude the original ad-blue module from working, all that needs to be done is to remove the F109 fuse before starting the engine.
The minusblue module will automatically be activated. To re-instate the original ad-blue module, all that needs to be done is to reinstall F109 fuse before starting the engine. The minusblue module will automatically be de-activated.
When the minusblue module is fully connected to the electrical circuit of the original ad-blue module, and after identification of the F109 fuse controlling the power feeding to the original ad-blue module the truck batteries can be Re-connected.
The minusblue module aquires the inputs from the CANBUS the first time the dashboard is turned on(key on but engine still off).
1) Make sure the F109 fuse is inserted.
2) Turn on the dashboard(key on) and verify that the red led is on.
3) After approx 1 minute the red led will turn off and the green led will Turn on.
4) Switch off the dashboard(key off).
After this procedure the minusblue module will be activated whenever the dashboard is turned on(key on).
The result will be:
1) If the F109 fuse is installed the original ad-blue system will be working. Both red and green leds will be on.
2) If the F109 fuse is not installed the original ad-blue system will not be working and the minusblue module will be activated. Both red and Green led will be flashing.
NOTE: ALL THE OPERATIONS WITH THE F109 FUSE MUST BE DONE WITH THE DASHBOARD SWITCHED OFF(KEY OFF).
LED FUNCTION ON - OFF
KEY OFF:- RED OFF, GREEN OFF - NO POWER FEEDING.
KEY ON:- RED OFF, GREEN OFF - TRUCK NOT SELECTED.
KEY ON:- RED ON, GREEN OFF - WAITING FOR SELF-LEARNING.
KEY ON:- RED OFF, GREEN ON - LEARNING COMPLETED.
KEY ON:- RED ON, GREEN ON - DATA SAVED, MODULE NOT ACTIVATED.
KEY ON:- RED PULSE, GREEN PULSE - DATA SAVED, MODULE ACTIVATED
When this box connected - Ad-blue system of the truck would be fully emulated, no errors related to Ad-blue.
The box can be fast and easy installed to truck. You can disconnect it, reset and install into another truck.
Shipping and delivery Attention:
Flat airmail: 7-18 working days on the way. For remote area or holiday, need more time.
DHL: For MOST non-free shipping goods, default shipping method is DHL. Need 3-5 working days on the way after dispatch the goods.
YANWEN Express: 7-14 working days on the way, no need to pay tax for most european counties.
EMS: 6-10 working days on the way. To Russian only send by EMS. For some remote area, if you do not want to pay remote fee, we can send it to you by EMS too.
Aramex: 4-6 working day. To most middle east counries. If you do not like this shipping method, please leave message on your order.
If you needs YANWEN express shipping or other shipping method like UPS, TNT, FedEx and so on, or you have special needs for your order, such as declared name and so on, please leave message on the order to notify us. Otherwise we will send the order as our usual practice.
As different country has different import policy, sometimes we will change the shipping method based on the counties and goods.
When you get the parcel, before sign for acceptance, please check the package to make sure the product is correct and no damage.
After sale service:
Any question you want to know or issue on usage. Please send email to email@example.com. Please give us your detailed description, or error photo. We will provide the solution or solve it for you by teamviwer. For some special function, you can take the photo or video and send us to check if you operate it rightly.
For any question, please contact us at:
facebook: Jean Clinton
After-sales questions and issues: Contact our Customer Service Department. (A customer representative will get back to you).
Please Sign In first if you want to later edit or manage reviews uploaded by yourself.